ANJIE-W105
The corrugated metal gaskets have been proven to be both reliable and cost effective for the application on flanges and heads where boat loading is sufficient. Corrugated metal is covered with graphite, ceramic or PTFE layer. An additional finishing layer is applied depending on the requirements of the medium to be sealed. The gaskets with soft layer on both sides are used in low pressure applications in large diameter flue gas ducts at high temperatures
Metallic Materials:
Metal material | Din material No. | Density | Hardness | Temperature |
CS/Soft Iron | 1.1003/1.0038 | 7.85g/cm3 | 90~120 HB | -60°C~+500°C |
SS304, SS304L | 1.4301/1.4306 | 7.9g/cm3 | 130~180 HB | -250°C~+550°C |
SS316, SS316L | 1.4401/1.4404 | 7.9g/cm3 | 130~180 HB | -100°C~+550°C |
Other metal materials are also available on request.
As per relevant standards or drawings from customers.
Non-metallic Layer Materials:
Flexible graphite, PTFE, non-asbestos, etc.
Normally in thickness of 0.5mm, 1mm, 1.5mm.
The corrugated metal gaskets have been proven to be both reliable and cost effective for the application on flanges and heads where boat loading is sufficient. Corrugated metal is covered with graphite, ceramic or PTFE layer. An additional finishing layer is applied depending on the requirements of the medium to be sealed. The gaskets with soft layer on both sides are used in low pressure applications in large diameter flue gas ducts at high temperatures
Metallic Materials:
Metal material | Din material No. | Density | Hardness | Temperature |
CS/Soft Iron | 1.1003/1.0038 | 7.85g/cm3 | 90~120 HB | -60°C~+500°C |
SS304, SS304L | 1.4301/1.4306 | 7.9g/cm3 | 130~180 HB | -250°C~+550°C |
SS316, SS316L | 1.4401/1.4404 | 7.9g/cm3 | 130~180 HB | -100°C~+550°C |
Other metal materials are also available on request.
As per relevant standards or drawings from customers.
Non-metallic Layer Materials:
Flexible graphite, PTFE, non-asbestos, etc.
Normally in thickness of 0.5mm, 1mm, 1.5mm.
